10in-Rack-Double-RaspberryPi-4B
10in network rack mount for 2 Pi 4B's. Uses threaded inserts to mount the modules to the rack face.
11
48
0
397
updated April 14, 2024
Description
PDFPrint face down with PETG or PLA. Cutouts for the inserts are 4.3mm which is what my template calls for on my printer.
Takes M3 heat-set inserts on the inside of the mount. Otherwise, all the other build instructions and variations on the original model apply.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Resized to fit 10in rack, removed cooling ducts, replaced captured nuts with M3 threaded inserts.
