For an bigger Advent wreath I made an adapter stand to replace the candles it used before.
https://www.thingiverse.com/thing:4011921
The stand worked perfectly, but the candles looked small. Also the white color wasn´t fitting, so I deceided to create a shell around the white stem and found this thing called "Candlestick Shade 01" by Whystler:
https://www.thingiverse.com/thing:11419
Size and dimensions are perfect. It also is an easy print without supports or any other hassle. I fired up FreeCAD to drill a matching hole all though the model and cut a little at the bottom.
The result looks awesome.
I included the FREECAD source file, so you can change the diameter of the hole and the length of the stem quite easy.
Many thanks to Whystler for his neat design and for sharing it with the community.
Printer:
TronXY X5
Rafts:
No
Supports:No
Resolution:
0.2
Infill:15%
Filament: Noyes PLA Red
Notes:
Use a brim if the bed adhesion is not perfect. Print in default position.
Category: DecorThe author marked this model as their own original creation. Imported from Thingiverse.