organiser with grid pattern and removable separator

organiser with grid pattern and removable separator

2024-05-18 update · uploaded a simple lid, to meet a request

photos show printed in black matte pla and brick red petg-cf

• 0.20mm layer height
• 10% adaptive cubic infill

dimensions > x: 200mm · y: 100mm · z: 110mm

includes two print profiles:

• dual_color_organizer_w_grid - for different colours / materials like seen on the photos
• single_color_organizer_w_grid, for same colour / material

note > the separator is a tight fit, with small tolerance, if your printer / filament struggle with smaller tolerances, reduce the scale of the separator in the slicer by 0.5~1%

commercial licence membership available on my patreon

buy me a coffee

note: all photos uploaded are of the actual printed model, taken inside a lightbox or in home studio