38 Calibre x 50 ammo box

The basic box is PLA and the Gasket is TPU 95.  The only assembly is the latch components, this will require a 2 x 1.6mm finish nails cut to length, I have super glued the nail ends in the latch and lid lugs.

The insert can be turned around depending whether you save the spent brass and store it in the box. Users choice.

The  basic print will take depending on your machine about 3-5 hours, the insert is the long print as I have made the tolerance quite precis because if you load your own the box will not let a budging round in.

Please fell free to comment as I am always looking to improve my designs.