Made for the HB R1001/1002/1003 Beluga but will probably work on the TRX4 Bronco 2021 aswell.
There are 2 different types, one with exhaust tips included and one that you can either print exhaust tips seperately or glue on bits of stainless pipes.
The pipes will print standing without supports but i recommend using a brim.
You will need 4x M3 screws, 15-20mm long.
The Exhaust mount will fit in the frame without screws and are held in by the rear bumper.
No modifications to the car needed!
I'm working on a rear servo winch mount that will replace the exhaust mount. I will add this later.
The author marked this model as their own original creation.