Looks good! What did you change on the base?
TT Furious Tourbillon
6/10/21 Updated the Base_Drive_Plate.STL, Base_Drive_Plate_a.STL, Base_Drive_Plate_b.STL, Base_Drive_Outer_Ring.STL,…
466
1450
1
15 k
updated November 18, 2023
Makes
Comments
the hardware/electronics package is out of stock at the specified link. is this package sold anywhere else?
View 2 more comments
@RobertHogue_628635 There is a detailed parts list in section 2 of the "Furious Build Notes.pdf" file, which should be part of the download. And section 6 has links for many of the parts that I ordered from Amazon for the project.
I really like the model, so I decided to make it. To make it work properly, I had to modify the three escapement parts (escape wheel, fork and balance shaft). I also built a small magnetic clutch to prevent breakage and facilitate synchronization. Now this magnificent model is working really well. Many thanks to the author mcmaven!
@PavelD_171736 would you mind sharing the changes you made?
The drawings call for a 'screw 10mm' - is there an stl file missing?
@aonomus Sorry about that. I just added the file. I also post my designs to Thingivers and Cults3d, so if something is missing you might try there. But thanks for pointing this out to me. Regards, Steve
@mcmaven_153870 Thanks! Was scratching my head for a long time trying to figure out if there was a version change or something.