Does anyone has this preset to fit an rtx 4080?
Enclosure for ADT-Link UT3G External GPU
This is an enclosure I designed for the UT3G external GPU dock with a Power Color Fighter RX 6600 and Flex ATX PSU.
25
347
0
3522
updated April 8, 2024
Makes
Comments
What is the maximum card length that this enclosure accommodates? Also, can a card have a backplate? Thanks!
View 9 more comments
@UNXFlandre_2437001 uploaded!
Is it possible to add 120mm fan to this Design? Or maybe an fan Controller? With 2 80 mm fans?
@Bayblu_2027320 There is not room for additional fans as designed. It should be relatively easy to add length at the front though. The front piece prints at 185mm tall so it still should print fine on most printers with an additional 15-25mm. It is less than 120mm wide so I would recommend a 92mm fan.
@Bayblu_2027320 I modified this enclosure to fit a 120mm fan and any 2 slot GPU up to 250mm. I also extended the height of the enclosure by 1cm.
Will be testing it with an Inno3D 4070 Super Twin Fan soon. Once confirmed working I will post it here :)
Shout out again to JR for the original design. (edited)