Sega System 18 Rom Board Case
Case for Sega System 18 rom boards. Supports both short and long rom boards.
0
11
0
114
updated April 9, 2024
Description
PDFFor the long rom boards you can only use the top. For the shorter rom boards you will need the bottom piece as the rom board only has 2 screw holes on the PCB.
The extra short version of the top/bottom case is for printers with a smaller print bed but will only work for the short rom board.
Use heat set inserts for the M3 screws.
Tags
Model origin
The author marked this model as their own original creation.
