PubMote

For best print quality use 0.4mm nozzle and 0.2 layer height.

Assembling the remote requires 3x 10mm M3 screws and heatset inserts for them. Current model has the hole diameter for the insert at 4.7mm and depth at 5mm but you can modify the .step to your needs.

I will add more info on the hardware that goes inside later.

7.4.2024. Increased thickness around screws

11.4.2024 Extended the screen holder a bit and made the USB port clearance tighter

14.4.2024 Made the ESP mount fit better and rounded pcb mount to avoid it hitting components