Always loved robot wars or wanted to give it a try but don't know how?
Here is an easy step by step guide to your first ever combat robot!!!
Designed with a flipper type weapon so very safe for newbies to the hobby, easy to build and cheap to run this antweight will get your foot in the door of UK antweight robot fighting that is happening all over the country.
All components are very easy to source and very cheap, especially in comparison to the big-ol-boys you used to see on TV.
Simply download all the parts and the PDF guide and enjoy! There's plenty of pictures to reference from and the guide is hopefully fairly straight forward.
Printing recommendations:
Tune your flow with a flow cube and test your extrusion before commencing any printing, it'll make putting everything together much easier.
Other than that I'd recommend a layer height of 0.2 to 0.28 and whatever your material settings are.
No supports are needed as they are designed in where required.
Happy printing and hope you enjoy the journey of building your antweight Pooper Scooper!
The author marked this model as their own original creation.