Camera Macro Sled

This project was a request by a friend, who needed a macro sled. The print and build is pretty straight-forward. All you need:

• 3d printed parts
• 8mm threaded rod (cut to length)
• Nema 17 + coupler
• Arduino Nano
• Stepper motor driver e.g. A4988
• 12V Power Supply
• custom PCB (available at my website)

• modified remote shutter or bluetooth module I've refined the conroller board of my open source 3D Scanner to work with this makro sled and in the future I want to combine the Makro sled with my 3D Scanning apparatus:
  https://www.thingiverse.com/thing:3050437

  If you want to find out more about the 3D Scanner/controller board you can check out
  http://www.openscan.eu (German)
  http://www.openscan.eu/?lang=en (English)

  https://youtu.be/Hh\_qpfdE7rU