Lucky 7

Further dual colour tests project….lucky7

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA BambuLab Basic Black
• PLA PolyTerra Charcoal Black
• PLA+ Sunlu Gray
• PLA BambuLab Basic Gray
• PLA BambuLab Basic Jade White
• PLA PolyTerra Charcoal Black
• PLA Overture Red
• PLA BambuLab Basic Jade White

Swap Instructions:

• Start with Black
• At layer #5 (0.48mm) swap to Charcoal Black
• At layer #9 (0.8mm) swap to Sunlu Gray
• At layer #17 (1.44mm) swap to BambuLab Gray
• At layer #28 (2.32mm) swap to Jade White
• At layer #37 (3.04mm) swap to Charcoal Black
• At layer #38 (3.12mm) swap to Red
• At layer #45 (3.68mm) swap to Jade White for the rest.

Enjoy my work? Support me by joining my club. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.