Lilygo T5 4.7 S3 E-paper display case

This is a case for the LILYGO® TTGO T5-4.7 Inch E-paper display (https://www.lilygo.cc/products/t5-4-7-inch-e-paper-v2-3) together with a stand.

Please note that this design is only compatible with the “v2.3” or “plus” variant of the board! (The one with 3 buttons on the top)

Screw: M3 x 10mm round head machine screw

Heated inserts: M3 x 6mm

Battery: Li-Polymer 3.7V 2500mAh 50mm x 60mm universal

Instructions:

1. Print all three files
2. Press heated inserts into the front panel's holes
3. Secure the battery in the back (I used double sided tape)
4. Insert the Lilygo board into the back (don't forget to plug the battery in)
5. Fit the two halves together
6. Screw them together
7. done

Reworked most of the original model to be more suitable for FDM printers:

• Larger, more easily printable buttons
• The case is now screw together instead of snap together
• Made more space in the back for a larger (flat) battery
• New stand, to accomodate the thickness