{"data":{"model":{"id":"826563","slug":"gridfinity-3x3-3x4-3x5-6u-and-12u-lidded-bin-for-s","name":"Gridfinity 3x3 3x4 3x5 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.2","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":2,"description":"

These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements:

Fully redesigned bins with a more efficient use of material
Slightly larger opening for the doors
New tab option for the sliding latches
New grid option to allow stacking 1x1 bins on the larger 2x and 3x bin models.
No supports needed (same as the v1.0 models)
Additional bin sizes added
Label \u201cchips\u201d which can be used with the grid option (new with v2.2)

Included here are 4 types of Gridfinity bins with latching lids:

6U Bins:

3x3 6U
3x4 6U
3x5 6U

9U Bins:

3x3 9U
3x4 9U
3x5 9U

12U Bins:

3x3 12U
3x4 12U
3x5 12U

There are 2 options for the lids, one is a plain lid, and the other has a grid, which allows proper stacking for 1x1 bins on top of these bins. With the newest v2.2 version, the grids now support optional label \u201cchips\u201d, which install between the grids and the lids. The grids can be used without the label chips if they are not required.

Text can be added to the grid label \u201cchips\u201d using the text as a modifier in the slicer using BambuStudio. The animation below shows the steps to add text to the \u201cchips\u201d (give it time, each step pauses for 10 sec so the text can be read). The steps in the animation are numbered as well (in the bottom left corner). There are additional images showing the steps to add text modifiers to create custom labels on my blog here.

Additionally, there are two latch designs included. One is a plain latch top, and the other has a flip up tab, which can help with opening the bins (see pics).

This design requires the following hardware:

(2) M3x6mm Button Head Cap Screws (BHCS) - or any M3x6 button head screws.

If using the lids with the Grid pattern, the following additional hardware is needed:

(2-3) M3x6 Flat Head Screws - M3x6 Button Head Cap Screws will also work.

Printing tips:

You can use the included 3MF which has all the models set up on 13 plates, including one multi-color option for the tabbed latches.

If you don't use the 3MF and manually set the files up in your chosen slicer, then I suggest using the following settings:

Arachne wall generator
15% gyroid infill.
PLA or PETG for the bases and PETG for the LID, since it has an integrated spring.
I used a textured PEI plate, but if you plan to use P-Touch labels, a smooth plate may work better.

If you print the lids with the grids (to allow stacking 1x1 bins), use the models which have holes in them and \u201cLID_GRID\u201d in the names. For example, these are the models needed for the 3x3 bins:

LIDDED_BINS-3E_3X3_LID_GRID_A.STL

The lids with the grid patterns require the additional M3x6 flat head screws. A couple drops of superglue is also a good idea to bond the grids to the lids.

If you print the tabbed latch tops, you can use the following files:

Single Color:

LIDDED_BINS-3E_LATCH_TOP_BOTH.STL

Multicolor (load both files together in the slicer to maintain their relationship and answer \u201cyes\u201d to load them as a single object):

LIDDED_BINS-3E_LATCH_TOP_A.STL

LIDDED_BINS-3E_LATCH_TOP_B.STL

Assembly:

Assembly tips can be found in \u201cStep 6\u201d at the link below:

https://www.mystoopidstuff.com/bambu-spares-box-build-guide.html

The doors and hinges are designed so they will be easier to install if the hinges are pushed into place with the door almost closed.

Other stuff:

If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff 20 bin and 25 bin cases (or other 6U tall cases):

If you want to check out my other Gridfinity cases, you can find them at the links below:

Gridfinity Box For Stuff 20 bin (6U) (updated to v2.3)
Gridfinity Box For Stuff 25 bin (6U) (max size for a Bambu X1C/P1S)
Gridfinity Box For Stuff 16 bin (6U) (Ender 3 size)
Gridfinity Box For Stuff 16 bin - 12U deep version (Ender 3 size)
Gridfinity Box For Stuff 2 bin (6U) mini version (can be used to test)
Gridfinity Single Watch Case
Gridfinity Triple Watch Case

If you want to store some small hardware and need some good labeled bins, Ch3vr0n posted some segmented bins for the Gridfinity system here:

https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b

There are currently no authorized sellers of prints of this model or prints of this model.

Thanks and Acknowledgements:

The models here could not have been made without the work of Zach Freedman, who introduced the world to Gridfinity, and then set it free for everyone to use. These models are not based on direct remixing of Zach' original models, but they are fully compatible, and use the same, or a similar specification for the bin bases, bin lips and base grids, which Zach Freedman developed. Zach Freedman's work is available on Thangs, and you can find examples of his Gridfinity designs here and here, which are available under his MIT license. If you like this model, or want to learn more about Gridfinity, you can check out Zach Freedman's YouTube, or you can support Zach Freedman's work on Patreon (patreon.com/zackfreedman).

And Finally,

If you find these models useful, please post a like or a comment with some pics of your prints.

You can find the other things I'm working on at my blog here. You can also follow me here on Printables or over at MakerWorld, to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!

Changelog:

4/11/2024: A 9U tall version of the bins was added.

7/4/2024: Updated to version 2.2 with new grid label \u201cchip\u201d option.

11/2/2024: Added 2x5 bins.

","category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","description":"Tidy up your tools and small parts and keep track of them. Print plastic storage cases, modular organizers, cable spools, drawer system, racks and more.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-11-02T19:16:27.215491+00:00","firstPublish":"2024-03-31T07:31:12.010202+00:00","datePublished":"2024-11-02T19:16:27.192308+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"These are Gridfinity Bins in 3x3, 3x4 and 3x5 sizes, with latching lids. They are available in 6U, 9U and 12U heights.","likesCount":50,"makesCount":2,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":258,"displayCount":1391,"filesCount":28,"privateCollectionsCount":40,"publicCollectionsCount":74,"pdfFilePath":"media/prints/826563/pdfs/826563-gridfinity-3x3-3x4-3x5-6u-and-12u-lidded-bin-for-stuff-with-latch-version-22-b73fd153-e131-44e3-bc3c-508a3bf5af39.pdf","commentCount":4,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"2973129","filePath":"media/prints/826563/images/6376922_bb7c479b-eae4-43e0-a801-7913e5d32d75_b1b7a9c2-ca62-45ee-b0b5-d36c9e89fb16/gridfinity_bins_lidded_4e.jpg","rotation":0,"imageHash":"dscNHYipl4eIeHd/hnd3dpqJf5v4","imageWidth":1200,"imageHeight":889,"__typename":"PrintImageType"},"images":[{"id":"2973129","filePath":"media/prints/826563/images/6376922_bb7c479b-eae4-43e0-a801-7913e5d32d75_b1b7a9c2-ca62-45ee-b0b5-d36c9e89fb16/gridfinity_bins_lidded_4e.jpg","rotation":0,"imageHash":"dscNHYipl4eIeHd/hnd3dpqJf5v4","imageWidth":1200,"imageHeight":889,"__typename":"PrintImageType"},{"id":"2973134","filePath":"media/prints/826563/images/6376930_c7a44204-e449-4bdc-98bc-00e869bf13f7_d82d5de8-adf3-4c4f-a5c2-0e34439ba0b5/gridfinity_bins_lidded_2k.jpg","rotation":0,"imageHash":"ZOcJHYbgiZmnlUmah0aIiPu6yI+b","imageWidth":1200,"imageHeight":900,"__typename":"PrintImageType"},{"id":"2973135","filePath":"media/prints/826563/images/6376931_0f3219fe-699b-44d6-87e9-8ae53a6f18e7_6645ff50-fb83-4799-8b64-25a764835e4c/gridfinity_bins_lidded_2j.jpg","rotation":0,"imageHash":"o+cJHYbQmJmjhWqomWaIifzi5Q5d","imageWidth":1200,"imageHeight":900,"__typename":"PrintImageType"},{"id":"2973136","filePath":"media/prints/826563/images/6376929_0506ac75-b83d-471f-be36-e00e63d8e633_86083168-f3a9-489d-b861-69c77947479c/gridfinity_bins_lidded_2g.jpg","rotation":0,"imageHash":"o+cJFYbhqYmgdmq5mYR3ef709T1d","imageWidth":1200,"imageHeight":900,"__typename":"PrintImageType"},{"id":"2973137","filePath":"media/prints/826563/images/6376928_1e82d56a-c0f4-4043-9a8b-6d5c5e5cfd3a_69cdc2a8-275f-46fc-9107-f63197274a28/gridfinity_bins_lidded_2f.jpg","rotation":0,"imageHash":"5PcNFYTAqYiDlWqomVaYiPzU9i58","imageWidth":1200,"imageHeight":901,"__typename":"PrintImageType"},{"id":"3018044","filePath":"media/prints/826563/images/6475573_6cdc90ef-cdea-426f-8b1e-87038869fef4_7305528f-fc15-423f-8dd2-822a8ec3c5c0/gridfinity_bins_3x-profile2.jpg","rotation":0,"imageHash":"8vcFBYDli2eWc6hhmmeHfxDfB0ln","imageWidth":2099,"imageHeight":1547,"__typename":"PrintImageType"},{"id":"3301537","filePath":"media/prints/826563/images/7107000_9507916a-45c8-42f4-b271-24ae34faa093_508a179c-91cb-4df6-ae2b-82c4ed2a78f5/grid-labels-6.jpg","rotation":0,"imageHash":"LggGDYK8jZZ0Z5hvZYd2qbB4CXqG","imageWidth":1200,"imageHeight":901,"__typename":"PrintImageType"},{"id":"3301538","filePath":"media/prints/826563/images/7107002_9e8b8499-4607-4550-a69e-61f6a44276c6_f2ca039b-4359-4c2f-a4ed-eedffee6dc47/grid-labels-5.jpg","rotation":0,"imageHash":"LQgGDYDfipVleYh/cneGhsBnCFt2","imageWidth":1200,"imageHeight":901,"__typename":"PrintImageType"}],"tags":[{"name":"bin","id":"2890","__typename":"TagType"},{"name":"bins","id":"29003","__typename":"TagType"},{"name":"gridfinity","id":"76163","__typename":"TagType"},{"name":"boxforstuff","id":"190306","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3500309","filePreviewPath":"media/prints/826563/previews/78610c17126fca78e36db4c4e57bab934291ef73.png","__typename":"STLType"},"license":{"id":"13","disallowRemixing":true,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":"5.00","highlightedModels":{"models":[{"id":"626897","name":"Bambu Labs X1C Spare Parts Case (Version 2.2)","slug":"bambu-labs-x1c-spare-parts-case-version-22","ratingAvg":"4.0000000000","likesCount":144,"liked":null,"datePublished":"2025-01-12T20:59:14.993303+00:00","dateFeatured":null,"firstPublish":"2023-11-12T09:24:46.684504+00:00","downloadCount":613,"mmu":false,"category":{"id":"136","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"136","name":"Bambu Lab Parts & Upgrades","nameEn":"Bambu Lab Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-12T20:59:15.047372+00:00","image":{"id":"2349620","filePath":"media/prints/626897/images/4970887_719d4aa8-0f56-46db-952a-9e45a08a56b6_010adf18-d40a-4457-931f-31e4e56981c1/bambu_toolkit-6b.jpg","rotation":0,"imageHash":"LAgKBQD8uoiFqFhYmHk3mHhflPVU","imageWidth":900,"imageHeight":1200,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"502306","name":"Remix of RyanDam's Cable Management Duct for Voron Printers Version 2.0","slug":"remix-of-ryandams-cable-management-duct-for-voron","ratingAvg":"4.9000000000","likesCount":267,"liked":null,"datePublished":"2025-03-05T13:29:50.530763+00:00","dateFeatured":null,"firstPublish":"2023-06-10T12:20:10.417643+00:00","downloadCount":983,"mmu":false,"category":{"id":"137","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"137","name":"Voron Parts & Upgrades","nameEn":"Voron Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-05T13:29:50.573148+00:00","image":{"id":"1946363","filePath":"media/prints/502306/images/4081511_0694f68b-b955-4757-9d5a-9fdced69392c/voron_2-4_tronics_cm_ducts1a.jpg","rotation":0,"imageHash":"9vcJBYL3uUd5d4d7dXeHirl3f334","imageWidth":1200,"imageHeight":919,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"79605","name":"Diabetes Testing Supply Organizer (with STEP file)","slug":"diabetes-testing-supply-organizer-with-step-file","ratingAvg":"5.0000000000","likesCount":38,"liked":null,"datePublished":"2024-03-07T15:10:35.126946+00:00","dateFeatured":null,"firstPublish":"2021-10-15T11:12:21.603792+00:00","downloadCount":91,"mmu":false,"category":{"id":"29","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"29","name":"Office","nameEn":"Office","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-03-07T15:10:35.635590+00:00","image":{"id":"446620","filePath":"media/prints/79605/images/855399_522735b8-2995-4ddd-b04f-577cb7e51038/large_display_diabetes_testing_org_v11-c_79605.jpg","rotation":0,"imageHash":"VTkGFoglfVmBmniwS8hYh3eH6nevXfg=","imageWidth":1024,"imageHeight":808,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"674660","name":"Dummy13 Goes to the Moon - Astronaut Remix (Single Color Version with a card option)","slug":"dummy13-goes-to-the-moon-astronaut-remix-single-co","ratingAvg":"4.8571428571","likesCount":419,"liked":null,"datePublished":"2025-03-14T17:42:55.412726+00:00","dateFeatured":null,"firstPublish":"2023-12-09T10:11:55.140435+00:00","downloadCount":1390,"mmu":false,"category":{"id":"36","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"36","name":"Action Figures & Statues","nameEn":"Action Figures & Statues","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-14T17:42:55.444560+00:00","image":{"id":"2497102","filePath":"media/prints/674660/images/5304441_23f700cb-d810-4b94-a490-3874bd3b53c9_9d0b7f8e-6f25-451a-b828-df7d570315ec/dummy13_astronauts_3d.jpg","rotation":0,"imageHash":"0ecNDwJoeHeAiYhgd7eJqHh4Bt5b1a8I","imageWidth":2340,"imageHeight":2350,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}