Modular Filament Drawer System SLICED for Bambu plates

very cool design, well thought through! using the rails as a structural part, really clever :) love it so I had to slice it to fit my plate. Made it so it will glue into place and has a hole for a small screw to secure it further if necessary.

also for all the Europeans out there have found some drawerrails that work on this.

further more, couldn't find that much half inch PVC piping here in Europe so MODIFIED the various parts to accept some 22mm roundbar. (also tried 19mm PVC but the clearance on the spools is not enough, the spools will sit too low)

could've gone for a 20mm bar but this was also too little margin, 22mm is widely available in aluminium or wood.

got a question about the front that I used. its my own design, added the file. also got the router files attached

sliced it for bambu plates (or other small building plates) and madr it square so when stacking you don't get gaps in between