This is a presentation stand for cake pops. It hold 15 cake pops. Our sticks have a diameter of 4 mm so, the 25 mm deep holes have a 5 mm diameter which narrows down to 4 mm at the bottom. The sticks hold pretty well in the holes also due to the rougher surfaces inside the hole due to the print.
And by the way: This was the ultimate WAF-rising device ;-)
Rafts:
No
Supports:
No
Resolution:0,2 mm
Infill:
15%
Category: Kitchen & DiningThe author marked this model as their own original creation. Imported from Thingiverse.