Creality K1/K1c/K1 Max Door Hinges Geared Nut Trap REMIX

M3 nuts must be inserted into the model during printing and will not be visible
16
94
0
1450
updated April 16, 2024

Description

PDF

In this remix the M3 nuts will have to be inserted at the printing stage.
I enlarged the hexagonal hole in the original model to make it easier to insert the nuts.Once the printing is finished,if you have inserted the dai without superglue,you may feel the nuts move,but it is not a problem,they cannot escape from there :-)

 

-Set pause at Layer n°30 in your slicer

-Insert the nuts,if you want,with superglue

-Getting the press to resume

 

You need  n°4 M3x16 screw (in the original model you use M3X14)

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

In this remix the M3 nuts will have to be inserted at the printing stage And the model is 2 mm higher
 

License


Highlighted models from creator

View more