Command adhesive hooks (small and medium)

This is a set of hooks that I designed for hanging diverse objects. This helps me free up horizontal surfaces and use doors and walls to hold things.

I quite like the Command adhesive strips as they are strong enough and removable. Hence why I designed these hooks to be stuck with Command adhesive strips.

The Command adhesive strips are double sided soft adhesive strips which can be bought in refill packs in 3 different sizes: small, medium and large. These are not picture hanging strips which are 2-part “velcro” pads with adhesive on one wide. These might also work as I believe the size is compatible. But the hooks were made to use adhesive strips.

I will be adding variations to this model as I design them, as I need different models.

I recommend printing on the side with supports for strength. My prints were PETG with 3 perimeters and 25% infill.

List of hooks I've designed for each Command strip size:

• Command™ Medium Adhesive and Refill Strips 17021P:
  • Long hammer support (to be used in a pair, see photo)
• Command™ Small Adhesive and Refill Strips 17022N:
  • Short flat support for 10mm deep fitting
  • Short flat slim support for 5mm deep 9mm diameter round hole
• Command™ Large Adhesive and Refill Strips 17023P
  •