GT1P FTIP Mouse Mod with Sidebuttons

I'am proud to present my own fingertip GT1P shell creation for Logitech G Pro X Superlight 1 and 2 internals.

GT1P by ㄷㅇㅇㄴㅆㅇㅁㄹ

Thanks to tyuhn and ii999 for the inspirations.

The clicks you can print with flat round holes or without. In the holes will fit some PTFE skates. I use ICEv2 (2nd smallest 6mm) with 0.85mm height e.g.

If u use the clickz without PTFE dot u should consider sanding the click area where it touches the switch and use some alutape / mylar tape e.g.

Left hander version will be available soon. Also working on a Razer v2pro internals version.

Stay tuned & please follow me here & on x please: coolm0dz

Instructions:

• Print in PLA with support where needed. Best use 0.20 or 0.18 layer height. 15% infill for best sturdiness. 5% for best weight.
• Lube the slide in plugs of the main clicks with lubricant so they slide in easier. I use Synco Lube from Super Lube.
• If it is too complicated to slide the buttons in/out just widen the slide in a bit with a flat screwdriver or use a thin nail file.
• You can also push out the clicks with a thin 0.8mm flat object or thin nail file from the bottom. https://twitter.com/i/status/1728850591361995154
• Place the battery in the back and a little bit to the RMB side to make the weight distribution best
• Do not screw the screws too tight. It can damage the shell or make the base warp.
• Version printed in PLA with Prusa i3 MK3S+ & BROZZL nozzle Ruby for E3D V6 0.4mm.
• If you want to get it more weight reduced use ABS. -25-30% weight.
• Overall if slide in of your party are to tight use sandpaper or nail file to reduce the end thickness a bit.
• Be aware that it is a free mod. I am not responsible for any damage or harm you do to yourself or your parts ;)

Some live images