Thank you, great design. Do you have model for 120mm pipe ?
Rain Water Catcher (parametric)
Catch water from drain pipe using this piece. Install it somewhere in the middle of the rain water drain pipe.
16
131
0
589
updated November 23, 2024
Makes
Comments
@RobertLanger_2256092 Sorry for long delay. I was not notified about the comments. I added updated fusion parametric model v12 and also model files for 80, 100 and 120 mm diameter pipes (these are most common in my country)
Great idea for a parametric model, thanks!
I would say, though, that the instruction to "Install it somewhere in the middle of the rain water drain pipe" is perhaps not specific enough.
With this kind of device, it's important to align the *top* of the weir (inner upstand) with the desired water level in the collection barrel. Especially the weir should not be so high that the barrel overflows.
Just wanted to clarify for anyone unfamiliar. But it should work great, especially in UV-resistant material (e.g. ASA).
@DesignedBySh_1143652 Thank you for your comment :) Great tips.