Dillon Locator Button Tap/Handle Upgrade
The Dillon XL-650 locator buttons are difficult to handle, the handles makes it much easier.
38
337
0
1024
updated October 19, 2021
Description
PDFI keep dropping those small locator buttons on my Dillon XL 650 reloading press...
This tap/handle is making my reloading life a lot easier.
Tip: To get better adhesion and give time for layers to cool - print 3 or more tabs at a time.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 20% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed
Shown parts printed in ABS with acetone surface finish, I have now switched to printing them in PETG.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
