LiPo battery case (5000mAh)

Hello.

This is a case for Lipo 50c 3S 11.1 V 5000 mAh batteries with dimensions:

Length: 137 mm

Width: 44mm

Thickness: 24mm

Balancing plugin: XH

Fitter.

Put the battery inside, then glue the two halves together, I used superglue.

Additionally, for adhesion, I glued a strip of rubber (cut from an old bicycle inner tube) on double-sided tape for better adhesion to the model.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

20

Filament: Devil Desing PETG Orange