This Module can be repeated in a square grid. To assemble the fabric by weaving the ‘arrow’ part of the first module through the hole of the second module. Continue this to the size you want.
Each module is 2.5x2.5cm.
Snapmaker J1S
Print without support | flat orientation
remove top & bottom layer | 35% line infill density
95A TPU
1.0g of filament
0h 6min
The author remixed this model.
It's a 25% version of the Faye module, but not scaled down; since the gaps & holes in this module are still 0.6mm - just like the big version.