12/67.5, Double Latch Modular Ammo Box w/ Handles

Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options.

Other ammo boxes of this type  can be found in my Double Flex Latch Ammo Boxes Collection https://www.printables.com/@brass_ring/collections/176717 .

This is a caliber specific, snap together cartridge box. The cartridge box is assembled from separate parts that are printed in orientations chosen to maximize strength and then snapped together. This is a sturdier version of https://www.thingiverse.com/thing:5270385 or https://www.printables.com/model/187176-modular-ammo-box that is intended to better handle larger and heavier cartridges in high counts.

Assembly Instructions: See the attached PDFs

Print Settings

Resolution Box and Handle Parts:

0.2mm

Resolution Latch and Hinge Parts:

0.12mm

Supports:

Yes

Infill:

15% Gyroid

Notes:

Supports are only required under the horizontal overhangs of the latches.

The Flex Latch and hinge parts are best printed in a flexible material - like PETG. Sometimes PLA will work, but I'm finding problems with brittleness with some PLA filaments.

Category: Tool Holders & Boxes