Minimalist Raspberry PI 4 case with 2.5" HDD

A retro styled minimalist case for Raspberry pi 4 with one 2.5 HDD.

WARNING!!!

• This case is usable only with specific cooler and specific SATA controller!

Instructions:

• Mount the stands to case using M3x8 screws
• Glue the rubber door bumpers over the screws
• Remove the bottom screws of the cooler on the RPI
• Insert the RPI into the case and tighten the original screws through the case
• Insert and connect the power button
• Connect the SATA controller to the HDD
• Insert the HDD into the case and tighten the side screws
• Connect the USB cable from the SATA controller and secure the cable with cable tie
• Glue the decoration to the cover and snap it onto the case

Required items:

• Cooler
  • https://www.aliexpress.com/item/1005005936003019.html
  • https://dratek.cz/arduino/74144-chladici-sada-s-vetraky-pro-raspberry-pi-4b-cerna.html
• Axagon ADSA-FP2A USB-A, SATA 6G
  • https://www.axagon.eu/en/produkty/adsa-fp2a
  • https://www.czc.cz/dokovaci-stanice-axagon-adsa-fp2a-usb-a-sata-6g/378810/produkt
• Power button (12mm diameter)
  • https://www.aliexpress.com/item/1005003794290752.html
• Cabinet door bumper (8mm diameter)
  • https://www.aliexpress.com/item/32839661456.html
• 4x countersunk screw M3x8
  • https://www.aliexpress.com/item/1005003496820167.html
• 1x cable tie
  • https://www.aliexpress.com/w/wholesale-cable-tie.html