Worked perfectly to get in behind a radiator. Had to print two of them and make a quarter of a turn before switching, but it worked brilliantly.
No room screwdriver – right angle screw driver
A screwdriver designed for accessibility, allowing the use of a standard bit in otherwise impossible to reach places
30
130
3
461
updated March 26, 2024
Makes
Comments
View one more comment
@RobLatour_54648 For some reason the included gcode would fail after just a few layers, my guess is the small contact area of the round part wasnt playing nice on my printer, even tried with brim and it failed. Got it to print successfully by adding supports at 5%
Didnt print the handle as the project i was working on didnt require more length on the tool
@Kackos Thanks for the explanation. Hopefully others wont have the same problem. If others have the same problem I can update the gcode file with some supports.