X Tensioner for Voxelab Aquila Pro

This tensioner modified to fit the voxelab aquila pro, that has the fancy frame. I've also modded the screw to accept the bolt from the stock tensioner. (lazily)

screw the 4mm bolt through and into the plastic. (hex side has a smaller hole to act as the nut)

The aquila pro clones the CR6-SE quite a bit so this may fit that printer also.

Print Settings

Printer Brand:

Anycubic

Printer:

Large Size Chiron

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.2

Infill:

20

Filament: x petg x

Notes:

more walls, moar power. Print on the side.

Made to fit The Voxelab Aquila Pro, changed the cage to fit the odd extrusion of the aquila pro fancy frame, and made the screw fit the stock M4 bolt and bearings from the original.