First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home:
Multistar Motor and Afro ESC set (http://www.hobbyking.com/hobbyking/store/uh\_viewitem.asp?idproduct=76071)
Since the weather is currently bad I did not yet have the chance to fly it outside. Indoor test flights were performed and very successful.
The goal for this design was to create a very stiff but light frame. Currently the design might still be a little overkill but I will optimize that in future designs. The landing gear is snap on and should not damage the frame in a crash.
The current total weight including a 1200mAh battery is 460g.
If you have suggestions, wishes or comments just let me know.
Printer Brand:
RepRap
Printer:
Mendel90
Resolution:0.2mm
Infill:
15%
Notes:
In order to increase the stiffness have at least 0.5mm of solid top and bottom solid thickness. I used 3 layers for my 0.2mm print.
Category: R/C VehiclesThe author marked this model as their own original creation. Imported from Thingiverse.