This mod makes it so you can see the print as its going
5h 10m
1× print file
0.20 mm
0.40 mm
45.00 g
Creality Ender 3 S1
4
38
0
473
updated March 18, 2024

Description

PDF

A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers.

This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the front of the extruder by off setting the fan duct while maintaining all factory components as a standard and maintaining the 40x10 Radial Blower performance characteristics.

A Fan Duct replacing the original forward facing one and repositioning the stock 40x10 radial blower fan to open up a more viewable path to the extruder nozzle.

This is a direct fitment with no messing around to make it fit. 

 

Information about the build:

Parts required to complete: 

6x M2 brass heatset inserts

3x M3x8mm buttonhead screws

2x M2x6mm buttonhead screws (Blower Duct)

4x M2x6mm buttonhead screws (40x10 Radial Blower Fan, or optionally use your originals)

you can also use stock hardware and some glue

Tags



Model origin

The author marked this model as their own original creation.

License