LOG CABIN BIRDHOUSE

A CUTE LOG CABIN BIRDHOUSE
Your funds support the creator's further activity.
$5
38
0
589
updated March 18, 2024

Description

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE AS SOON AS YOU JOIN, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

FEATURES:
-Very few supports (only on top beam and chimnee)
-All parts are already placed in the right orientation
-Large bottom door for cleaning between seasons
-3 diameters of entrance included: 28.5mm, 32mm, 38.5mm
-Detailed exploded view to help you with the assembly
-Big parts can be done with a layer height of 0.3 with no problem to speed up printing time. (House body on the pictures was made with 0.3 layer height)
-Sturdy and strong design, with thick walls that won't deform overtime.
-All the files are in the included zip folder.

Be sure to have your bridge settings at "ON".
For the small parts, use 4 walls. This will make a stronger piece.

Watch for over extrusion. If you're having some fitting problems, simply sand gently the parts to help them fit together. But with a good calibration, everything should be fitting together very well.

Can be hang or wall mounted.

This one is very close to the limits of a prusa mk3s bed. It will be ok on a ender 3 bed, but for prusa owners i suggest that you double check all big parts. At least you can scale them down by 1% to help if necessary.

SCALES :
100% - Will use m4 screws.
75% - will use m3 screws.

If you choose to hang it, you have two holes provided on the top beam.

If you have any problems, just send me a message.

Have fun!!!

Tags



Model origin

The author marked this model as their own original creation.

License