Flashforge Adventurer 5M - Arducam Camera Mount

I created this camera mount for the Flashforge Adventurer 5M. The camera I used is an Arducam, but this will work with most 38x38mm camera modules.

Installing Camera to Mount:
This is designed to use 4: M2 screws to attach the camera to the mount.

Installing Mount to Frame:
If you printed the enclosure, you can fix the mount to the frame with 1: 3M screw. I also remixed the A1 guard plate to include an extra hole so you can use 2: 3M screws to mount it.

Tips:

No supports needed.

You will want to used a camera with a lower profile lens. The camera with a lens over  ½" long will get hit by the extruder.