TS101 Soldering Iron adapter for Dremel Workstation 220

As I couldn't find a model that fit the TS101 (with the appropriate thread feature) to fit it to the Dremel Workstation 220, I had to make my own.

The thread allows it to fit into the same connection as various Dremel tools with the EZ Lock.
The model features two different parts.

Dremel_Thread_Base
Main model that connects to the Dremel Workstation itself.

Hardware needed:
3x M3 Heatset Inserts (1x - if TS101_Backrest is not printed)
1x M3x10

The M3x10 functions as a locking feature to hold the TS101 in place.

TS101_Backrest
A part that gives the back of the TS101 some extra support when tightening down the M3x10 against the TS101.
Not really needed - more of a “what if it distorts the angle when tightening it down". 

Hardware needed:
2x M3x30

The M3x30 is to assemble the backrest onto the Dremel_Thread_Base