Lambda-Class Imperial Shuttle Kit Card

More of my Star Wars kit cards are available at:
Millennium Falcon Kit Card
Tie Interceptor Kit Card
Landspeeder Kit Card

Also check out the awesome Star Wars Kit Cards by
benzz88
Edabot
Nakozen and
delman83

This was made to fit when printed on my homemade hypercube300 printer which is not the highest precision printer in the world, so you may have to adjust the holes, or use a little glue depending on how dialed in your printer is. Adjusting the z-scale slightly up or down without changing the x & y scale might help as well.

There is a small hole in the top fin for hanging, or using as an ornament if desired.

Printed card is 150mm X 130mm X 5mm.
Assembled Model is roughly 80mm X 80mm X 50mm (with wings folded up).

Print Settings

Printer:

HyperCube300

Rafts:

No

No

Resolution:

0.2

20%

Filament: Hatchbox PLA White

Notes:

Parts only file is included if you just want to build it and don't want to waste the extra plastic.