This is a printable model of a device which folds a 1cm Keder / Piping out of a 4cm fabric strip. It folds the edges to the inside and than folds it to a U-shape, so you can sew it to your fabric edges to prevent from frazzling.
Wire:
Bend a very small hook on one end (and optionally a ring on the other end).
Fabric strip:
Cut the edges (as lead it champers), and cut a small hole in as show on the picture below.
Thread the prepare wire form the “U-side” through the device.
Hook up the fabric strip in the hook of the wire
Pull the strip through the device
That's it.
Depending on the used fabric, you might need to press or iron the folded strip, to let it remain in the shape until you have sew on the fabric.
Nothing special.
I used PETG, but other materials might work, too.
Version | Date | Change log | Slicer |
1.0 | 16. Mar. 2024 | first publish | PrusaSlicer Version 2.5.0 |
The author marked this model as their own original creation.