SR6 + OSR2 Desk Mount - Adjustable
A simple adjustable desk-mount for the TempestMax SR6 or OSR2 utilizing minimal hardware.
12
265
0
1607
updated March 15, 2024
Model files
Joint Granular.stl
Joint Fine.stl
Screw.stl
SR6_OSR2 Mount BasePlate_Granular.stl
SR6_OSR2 Mount BasePlate_Fine.stl
SR6_OSR2 Mount Clamp_Granular(S).stl
SR6_OSR2 Mount Clamp_Fine{S).stl
SR6_OSR2 Mount Clamp_Granular(B).stl
SR6_OSR2 Mount Clamp_FIne(B).stl
Model origin
The author remixed this model.
Differences of the remix compared to the original
I utilized the Hirth joint and bolt-knob from Eng. Yehia's 2020 extrusion model for the Granular version of the mating surface. Thank you!
https://www.printables.com/model/202276-hirth-joint-for-20x20-extrusions
I utilized the Hirth joint from ledres wonderful Hirth joint example, found here. Thank you!
https://www.printables.com/model/114737-hirth-joint-with-source-files-and-documentation
I have also utilized several models shared by the wonderful and generous members of the TempestMax discord. Thank you for sharing your mounts with everyone, and for your hard-work/expertise. This mount would not be possible without you creating them.