Customizable Keychain with Name

This Fusion 360 file is very simple to customize and export so you can have your own custom STL to print. Use the keychain as an accessory or even to as a luggage tag. 

The base keychain has already been modeled, and in the project browser you will find a sketch with the name “EDIT THIS SKETCH TO CHANGE NAME”. As the name implies, right click this name and hit “edit sketch”. Then double click the blue “NAME” and change this to whatever name you would like.

You will also need to adjust the length to match whatever length the name you choose is. You can do this by hitting “S” to open the shortcut menu, then seaching for “Change Parameters”. Once you pull up the Parameters menu, just adjust the Parameter for “Length” until it fits the name you've chosen. 

Finally Right click the Body named “EXPORT THIS BODY TO STL” and hit Save as Mesh, this will save your Custom STL wherever you choose. 

I printed it with a simple color change at the name, you can accomplish this with a multicolor printer or even a simple filament swap at a certain layer. 

**There are a few STLs available to download if your name happens to match, but you must use the Fusion 360 File for Custom Names**

Layer Height: 0.2mm

No Supports Needed