M93p Tiny HDD/SSD Drive Caddy

There are a lot of Lenovo M93p Tiny computers being sold on Ebay without their hard drive caddy. I designed this tray to mount an SSD into mine. It should fit any standard 2.5 inch drive. I'm told this may fit other similar models of the Lenovo Tiny product line, but I have only tested in the M93p.

You'll need some M3x4 screws to mount the drive to the tray and the tray onto the motherboard.

The Fusion 360 design file may be found here:
https://a360.co/2QrC3Tt

(It prints upside down, no support, etc. Mount your drive to the flat side of the tray.)

[Imported from my older designs on Thingiverse.]