Very nice case! It fits perfectly.
Minimalistic Raspberry Pi 4 Case
Slim and minimalistic Raspberry Pi 4 Case. Printed with a Prusa Mk3s in Prusament PLA Prusa Orange.
7
213
2
751
updated March 17, 2024
Makes
Comments
Print turned out great, but I'd love to know what size and type screws you designed this for. I went through my usual screw trays, along with my PC and model screw collections and didn't find anything suitable. Looks like a no. 4 or 6 maybe? Countersunk head obviously, but it would be helpful if you mentioned what screw you designed this to use. BTW I printed the original version on an Ender 3 (max neo) with Microswiss NG extruder 0.4mm nozzle and Eryone PLA. It is snug but fits well, tight seems all around.
@jostafew_2480538 I used metric 3 mm (M3) countersunk head screws (see DIN 965).
@itz_niklas_103018 Cool, thanks for the quick reply!
I was looking for a minimal case for the RPi4 and I liked this model. It is good, but there is one problem, it is way too tight in some parts, mainly on the USB/Ethernet port part. It didn't fit all so I had to clip it quite a bit (breaking part of it).
I printed it using a 0.6mm nozzle, maybe it works fine when printed on a 0.4mm. But it would be great if the creator adds a bit of tolerance.
Thanks!
@jvlobo Thanks for your feedback. I uploaded two more files with wider tolerances.