{"data":{"model":{"id":"799599","slug":"4x4-gridfinity-box-for-stuff-bfs-16-bin-6u-version","name":"4x4 Gridfinity Box For Stuff (BFS) - 16 BIN 6U Version 3.3 - Ender3 Size","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"4.5000000000","myRating":null,"ratingCount":2,"description":"

This is the updated V3.3 Version of the 16 BIN (4x4) 6U Gridfinity Box for Stuff.

This is designed to fit on an Ender3 size bed (the footprint is 196x214mm).

This is 16 bin version of the 20 bin Gridfinity Box For Stuff.

See the 20 bin model for printing and assembly suggestions, since this version is the same, just smaller. I have a build guide on my blog with some tips on assembly. The instructions are for a case with more features, but it shows how to assemble the latches and hinges. If you want to run a smaller test print first, before jumping into the larger models, there is a 1x2 version here, which can be used to test fit of the parts on a smaller scale.

It requires the following hardware:

(2) M3 x 12mm SHCS (these hold the latch \u201ccleats\u201d to the top of the case)
(4) M3 x 20mm SHCS
(4) M3 x 25mm SHCS or (2) M3 x 50mm SHCS
(2) M3 x 30mm SHCS
(64) 6x2mm Cylinder Magnets - OPTIONAL
(SHCS = Socket Head Cap Screws)

The only files that are different from the original design, are the parts for the top and bottom (base) of the case. All latch, label, and handle parts are carried over unchanged from the original (but are included here for convenience).

PETG is recommended for the latches. A 3MF 7 plate profile (including 3 alternate plates) with modifiers is included. It uses the following settings:

PLA for all parts but the latches, which are set up to use PETG
0.4mm X1 Carbon profile
3 Walls
Arachne wall generator
12% gyroid infill (base, modifiers are included which range from 15-25%)
No Supports
Brim on several parts including the tops and bottoms of the case. There is no Brim on the MMU version of the top.
Several optional multicolor parts.

AMS is not required, but here is how it is set up in the profile:
1 = PLA- Gray
2 = PLA - Blue
3 = PLA - Orange
4 = PLA - White
5 = TPU - White (this is the non-AMS spool on the back)
6 = PETG - Blue (used for the latches only)

If printing the gasket version of the base, I recommend that you test that your printer can run TPU without issues first. The cap of a sharpie is the tool I use to press the TPU gasket into place. The gasket is not symmetrical so make sure to verify the position before installing it Start by pressing in the middle of the gasket along all 4 sides, then once it's set in position, press in the corners.

There are also two versions of the top, one is designed for an MMU/AMS and features the \"Unofficial Gridfinity Logo\" (or at least the best copy of it I could make of it, since the .svg's did not load correctly from github). The other version is, you guessed it, plain with no logo, for single color printers.

Finally, there are three versions of the labels for the front of the case. The first is designed to be used with 12mm Brother P-Touch (or similar) labels. The second is a multi-color label using the \u201cUnofficial Gridfinity Logo\u201d. And finally, there is a plain label included, in case you want to use the slicer tools to add embossed text to it.

The older v2.1 files are included in a folder named \"OLD V2-1 16 BIN 6U FILES\".

Update 5/3/2024: I was notified in the comments of a problem with the model (there was a hole that was partly filled in the base). This is corrected now, and the new models for the base are V3-3_2R, which are updated here. The 3MF is also updated with the repaired models. Thanks to user_2916867828 for letting me know about the problem.

Other stuff:

If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff 20 bin and 25 bin cases (or other 6U tall cases):

If you want to check out my other Gridfinity cases, you can find them at the links below:

Gridfinity Box For Stuff 20 bin (6U) (updated to v2.3)
Gridfinity Box For Stuff 25 bin (6U) (max size for a Bambu X1C/P1S)
Gridfinity Box For Stuff 16 bin (6U) (Ender 3 size)
Gridfinity Box For Stuff 16 bin - 12U deep version (Ender 3 size)
Gridfinity Box For Stuff 2 bin (6U) mini version (can be used to test)
Gridfinity Single Watch Case
Gridfinity Triple Watch Case

Additionally, there are some alternate latch parts which may help if you do not have the M3x30mm screws or have difficulty installing the latch \u201ccleat\u201d.

If you want to store some metric hardware in this, Ch3vr0n posted some segmented bins for the Gridfinity system here:

https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b

Thanks and Acknowledgements:

The models here could not have been made without the work of Zach Freedman, who introduced the world to Gridfinity, and then set it free for everyone to use. These models are not based on direct remixing of Zach' original models, but they are fully compatible, and use the same, or a similar specification for the bin bases, bin lips and base grids, which Zach Freedman developed. Zach Freedman's work is available on Thangs, and you can find examples of his Gridfinity designs here and here, which are available under his MIT license. If you like this model, or want to learn more about Gridfinity, you can check out Zach Freedman's YouTube, or you can support Zach Freedman's work on Patreon (patreon.com/zackfreedman).

And Finally,

If you find these models useful, please post a like or a comment with some pics of your prints.

You can find the other things I'm working on at my blog here. You can also follow me here on Printables or over at MakerWorld, to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!

Changelog:

","category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","description":"Tidy up your tools and small parts and keep track of them. Print plastic storage cases, modular organizers, cable spools, drawer system, racks and more.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-08-18T17:46:35.535460+00:00","firstPublish":"2024-03-10T11:45:35.780155+00:00","datePublished":"2024-08-18T17:46:35.520566+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"A 4x4 box to put your 16 x 6U Gridfinity bins full of stuff in.","likesCount":88,"makesCount":2,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":277,"displayCount":2120,"filesCount":34,"privateCollectionsCount":71,"publicCollectionsCount":87,"pdfFilePath":"media/prints/799599/pdfs/799599-4x4-gridfinity-box-for-stuff-bfs-16-bin-6u-version-33-ender3-size-18b18ad2-dac6-46ae-a079-d487d304164f.pdf","commentCount":10,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"2931418","filePath":"media/prints/799599/images/6288765_337cd685-073e-4869-928c-2b5251f5f0b6_1ab17be7-1b2b-4c66-8f00-9f899174975d/gridfinity_4x4_6u-1e.jpg","rotation":0,"imageHash":"asYJDYL5hmeGiXeNdYaHaPqLja/I","imageWidth":1200,"imageHeight":901,"__typename":"PrintImageType"},"images":[{"id":"2931418","filePath":"media/prints/799599/images/6288765_337cd685-073e-4869-928c-2b5251f5f0b6_1ab17be7-1b2b-4c66-8f00-9f899174975d/gridfinity_4x4_6u-1e.jpg","rotation":0,"imageHash":"asYJDYL5hmeGiXeNdYaHaPqLja/I","imageWidth":1200,"imageHeight":901,"__typename":"PrintImageType"},{"id":"2931412","filePath":"media/prints/799599/images/6288769_eb84453c-652c-416c-b4d0-c10b37ba1b12_be388ba0-72cc-440e-9a51-aedd185e3b45/gridfinity_4x4_6u-1d.jpg","rotation":0,"imageHash":"qdYJDYD5iGenR5iNdXeFefurbY/b","imageWidth":1985,"imageHeight":1489,"__typename":"PrintImageType"},{"id":"2931414","filePath":"media/prints/799599/images/6288766_6b8cf537-ad96-4aba-bbca-f3c0417816e7_59418769-a3b5-48b4-b895-15d81214ff89/gridfinity_4x4_6u-1c.jpg","rotation":0,"imageHash":"LOcJHYL5Nop1h3d6hoh4ePl+l+93","imageWidth":1985,"imageHeight":1489,"__typename":"PrintImageType"},{"id":"2931416","filePath":"media/prints/799599/images/6288768_cd2d6cb1-8bd4-4f1a-b2d4-073409a446ef_09f6c452-e3bc-4ec3-b1d3-af5c78dd153a/gridfinity_4x4_6u-1b.jpg","rotation":0,"imageHash":"qtYJHYLpp3h5hnePdDaYZ6h/jfvX","imageWidth":1985,"imageHeight":1489,"__typename":"PrintImageType"},{"id":"2931413","filePath":"media/prints/799599/images/6288770_eea4b6de-c9b1-4fde-9787-81396fb7c50e_7cc81b89-29e1-40c6-b852-f48497472b32/gridfinity_4x4_6u-1a.jpg","rotation":0,"imageHash":"acYNBYLYqIh5h4ePdXV3iL9wn034","imageWidth":1985,"imageHeight":1489,"__typename":"PrintImageType"},{"id":"2931415","filePath":"media/prints/799599/images/6288764_555f6d19-6310-4167-8950-0746364a9418_e024423d-7b8c-4322-95de-f374b91c4ca2/gridfinity_4x4_6u-1f.jpg","rotation":0,"imageHash":"a8YJDYD7hYaiaWiYZ3WHesq/p/uJ","imageWidth":1489,"imageHeight":1118,"__typename":"PrintImageType"},{"id":"2931417","filePath":"media/prints/799599/images/6288763_dae92bb6-c688-4742-963d-cd96ba733e6b_a40a135d-bba6-447d-8eba-06ebf49775dc/gridfinity_4x4_bfs_v3-3-bs3.jpg","rotation":0,"imageHash":"dfgFFYD4dnd1inZupJdYmAaK4gz7","imageWidth":1600,"imageHeight":1096,"__typename":"PrintImageType"},{"id":"2931422","filePath":"media/prints/799599/images/6288785_b108b29e-578f-42d5-95a5-b50c39a44511_0dc64225-6edb-4437-9e1a-bbef0b3d77fe/gridfinity_4x4_6u-1h.jpg","rotation":0,"imageHash":"ddcNHYbniIh4d4ePdXZ4d/d3b4/3","imageWidth":1200,"imageHeight":898,"__typename":"PrintImageType"},{"id":"2931411","filePath":"media/prints/799599/images/6288767_27ae9cab-c5e7-4713-8eaf-a44fe5a410ae_a583eb07-56ec-4fb9-bd65-0411da23bc78/gridfinity_4x4_6u-1g.jpg","rotation":0,"imageHash":"68YJDYKqt5iHeHh/h3eHeo9tb6r4","imageWidth":1400,"imageHeight":1006,"__typename":"PrintImageType"}],"tags":[{"name":"box","id":"65","__typename":"TagType"},{"name":"storage","id":"1916","__typename":"TagType"},{"name":"bins","id":"29003","__typename":"TagType"},{"name":"gridfinity","id":"76163","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3451214","filePreviewPath":"media/prints/799599/previews/d7a2319f0f359c1c1a7ac74a1d754857858bfabb.png","__typename":"STLType"},"license":{"id":"13","disallowRemixing":true,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":"5.00","highlightedModels":{"models":[{"id":"626897","name":"Bambu Labs X1C Spare Parts Case (Version 2.2)","slug":"bambu-labs-x1c-spare-parts-case-version-22","ratingAvg":"4.0000000000","likesCount":147,"liked":null,"datePublished":"2025-01-12T20:59:14.993303+00:00","dateFeatured":null,"firstPublish":"2023-11-12T09:24:46.684504+00:00","downloadCount":616,"mmu":false,"category":{"id":"136","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"136","name":"Bambu Lab Parts & Upgrades","nameEn":"Bambu Lab Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-12T20:59:15.047372+00:00","image":{"id":"2349620","filePath":"media/prints/626897/images/4970887_719d4aa8-0f56-46db-952a-9e45a08a56b6_010adf18-d40a-4457-931f-31e4e56981c1/bambu_toolkit-6b.jpg","rotation":0,"imageHash":"LAgKBQD8uoiFqFhYmHk3mHhflPVU","imageWidth":900,"imageHeight":1200,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"502306","name":"Remix of RyanDam's Cable Management Duct for Voron Printers Version 2.0","slug":"remix-of-ryandams-cable-management-duct-for-voron","ratingAvg":"4.9000000000","likesCount":268,"liked":null,"datePublished":"2025-03-05T13:29:50.530763+00:00","dateFeatured":null,"firstPublish":"2023-06-10T12:20:10.417643+00:00","downloadCount":986,"mmu":false,"category":{"id":"137","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"137","name":"Voron Parts & Upgrades","nameEn":"Voron Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-05T13:29:50.573148+00:00","image":{"id":"1946363","filePath":"media/prints/502306/images/4081511_0694f68b-b955-4757-9d5a-9fdced69392c/voron_2-4_tronics_cm_ducts1a.jpg","rotation":0,"imageHash":"9vcJBYL3uUd5d4d7dXeHirl3f334","imageWidth":1200,"imageHeight":919,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"79605","name":"Diabetes Testing Supply Organizer (with STEP file)","slug":"diabetes-testing-supply-organizer-with-step-file","ratingAvg":"5.0000000000","likesCount":39,"liked":null,"datePublished":"2024-03-07T15:10:35.126946+00:00","dateFeatured":null,"firstPublish":"2021-10-15T11:12:21.603792+00:00","downloadCount":95,"mmu":false,"category":{"id":"29","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"29","name":"Office","nameEn":"Office","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-03-07T15:10:35.635590+00:00","image":{"id":"446620","filePath":"media/prints/79605/images/855399_522735b8-2995-4ddd-b04f-577cb7e51038/large_display_diabetes_testing_org_v11-c_79605.jpg","rotation":0,"imageHash":"VTkGFoglfVmBmniwS8hYh3eH6nevXfg=","imageWidth":1024,"imageHeight":808,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"674660","name":"Dummy13 Goes to the Moon - Astronaut Remix (Single Color Version with a card option)","slug":"dummy13-goes-to-the-moon-astronaut-remix-single-co","ratingAvg":"4.8571428571","likesCount":422,"liked":null,"datePublished":"2025-03-14T17:42:55.412726+00:00","dateFeatured":null,"firstPublish":"2023-12-09T10:11:55.140435+00:00","downloadCount":1400,"mmu":false,"category":{"id":"36","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"36","name":"Action Figures & Statues","nameEn":"Action Figures & Statues","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-14T17:42:55.444560+00:00","image":{"id":"2497102","filePath":"media/prints/674660/images/5304441_23f700cb-d810-4b94-a490-3874bd3b53c9_9d0b7f8e-6f25-451a-b828-df7d570315ec/dummy13_astronauts_3d.jpg","rotation":0,"imageHash":"0ecNDwJoeHeAiYhgd7eJqHh4Bt5b1a8I","imageWidth":2340,"imageHeight":2350,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"171061","handle":"MyStoopidStuff","verified":false,"dateVerified":null,"publicUsername":"MyStoopidStuff","avatarFilePath":"media/auth/avatars/68/687c1e23-869c-40ce-9cfa-f0d7da00eed9.png","badgesProfileLevel":{"profileLevel":23,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}