Bigger version of this moosehead:
https://www.printables.com/model/768113-moose-wallmount
I cut the original model up so the antlers can be printed seperately, making a bigger print possible.
If printed at 100% the result will roughly be 27x29x19cm. Printable on a 20x20x20 printer.
There are files with and without support.
The ones with support worked for me.
When printing with support you need the following files:
- backplate.stl
- head_support.stl
- left_antler_and_connector_support.stl
- right_antler_and_connector_support.stl
When printing without support:
- backplate.stl
- head_no_support.stl
- left_antler_no_support.stl
- right_antler_no_support.stl
- left_connector.stl
- right_connector.stl
The connectors might need some sanding, and are only there to fix the parts in place when glueing it together (you could do without).
If you do decide to print this, i would love to see the result!
The author marked this model as their own original creation.