5:1 ratio ogive nosecone designed to fit a tube with an OD:41.6mm and ID:40.5mm.
The nosecone has been split into 3 separate parts so that it can be printed on a small print bed. The nosecone is two parts with a maximum hight of 120mm with the shoulder printed separately.
The shoulder has been separated from the main nosecone so that a plywood bulkhead can be installed from the inside before it is glued to the rest of the nosecone.
All the parts have been drawn with a wall thickness of 1.5mm.
I have included files for all the parts separately, as well a file that has all 3 parts laid out ready to print.
Printer Brand: Up!
Printer: Up Plus
Rafts: Yes
Resolution: 0.25mm
Infill: 100
Notes:
Printed in ABS
The author marked this model as their own original creation. Imported from Thingiverse.