AMS Riser for ARC Enclosure (new version)

Hello.

I recently bought an AMS and could not find a riser that could fit my P1P with ARC Enclosure. I found one that could be exactly how I wanted (screwed in the ARC itself) but it could not fit due to the new version of AMS being with different plastic spacers on the bottom.
 

I changed the plug size for the middle spacer while keeping the left and right spacer the same as the original model.

I also wanted to be able to keep the top panel open so I edited the model to have a little piece of plastic to hold the panel if not needed to be closed.

You will need, apart from the 3D parts, 8 M3x4x5 brass inserts and 8 M3x6 screws.

The installation process is very simple indeed:

• Print all the models (I added a .3mf file with the way I oriented the parts in my printing process)
• Solder in the holes in the plugs the brass inserts
• Insert the plugs in the riser parts
• Use the screws to secure the parts together
• Screw the riser to the ARC Enclosure
• Put the AMS onto the riser

Old version (with 5 spacers on the side):

New version (with 3 spacers on the side):

Check your version before printing!
 

Changed the plug size and the holder spacers to fit the new version of the AMS. Check your version before printing!