Stackable Storage Tray Container

This storage container uses stackable trays with different sizes and layouts to allow for optimal organization. You can print the model without using support material, but you will have to insert two pauses into the G-code. These pauses will allow you to insert the magnets mid-print. After resuming the print, the magnets will then be covered by filament, leaving a clean appearance. Note the orientation of the magnets during insertion!!!

The model is designed to incorporate round magnets with a diameter of 10 mm (slightly less) and a thickness of 2mm (slightly less).

Support

If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: https://s.click.aliexpress.com/e/_AoUC8h

Whenever you buy something through this link, I get a small kickback without costs for you :)