Bosch GO L-BOX MINI organizer

The space utilization in default L-BOX Mini for BoshGO is ridiculous, so I designed a modular bit organizer.

Objectives:
1. Utilize space as efficient as possible
2. Be modular so one part can be swapped if in the future I will have different needs

One can print different layouts, left and right trays are interchangeable (need to be mirrored) :
• Default layout (on the left 3 racks of long bits, middle 2 trays (top tray with insert), right 2 trays

• Symmetrical layout (on the left: mirrored right trays , stl name: "tray-right-…")

· Other layouts

Asembly is a bit tricky:
· Start with walls, do NOT slide them just put them in position (on the left I have TPU long bit holders that can be bent)


- Add stiff PLA parts

- Slide bottom trays

- Put the long bit holders and inserts (it's easier to assembly them without bits in them), inserts can be fixed in place using glue.

- Trim the original organizer so that only screw driver mold is left

You are done !

Print recommendations:

• 0.4 nozzle with 0.2 layer height 
• TPU: long bit holders and inserts (inserts may need to be glued)
• PLA/PETG everything else
• Parts that have “male” “hinges” need support (top trays and long bit holder)