Eve - Ball Jointed Doll

This is a 1/3 scale ball jointed doll I designed mostly as a way for me to get acquainted with Blender.

This model is my third blender sculpt and my first bjd, plus I've never actually seen a ball jointed doll in real life sooo.. have low expectations lol

I called her Eve because she's the first

I will eventually print it, when I do I'll post pictures.If I update parts, I'll be sure to update the files here.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

Yes

Supports:

Yes

Resolution:

.12

Infill:

20

Filament: amazonbasics pla white Info

• The head is designed to snap together with 4 6x2mm round neodymium magnents.
If you don't want to use magnets there is a "magnet" file included which can be used to fit the head together by fitting it into the magnets cutout for either the head or the cap. Eyes should be 14mm. I've created some printable eyes [here](https://www.thingiverse.com/thing:4701088) I don't know what elasitc size will work best with this model but I had 3mm in mind. feet are (supposed to be) 7cm but no other body parts, or ball joints are any kind of standard size - at least not intentionally. the models are not in any specific orientation for printing. She stands about 54cm tall

Updates

Reuploads/modifications

• 26 Dec 2020 - fixed jagged forearm hollows
fixed orientation and doubled height of magnet model to facilitate use as a plug **29 Dec 2020** - improved upper arm and forearm topology for less jagged edges. split two-sided models into left and right sides to facilitate better print orientation. left and right sides are mirror images. it may be only necessary to download one side if desired. [**EYES**](https://www.thingiverse.com/thing:4701088)

Progress Pix