Over Engineered Dice

I built this dice to solve the problem with 3d printed dice that one face of the dice is printed against the print bed. I wanted to try and create a dice that wouldn't have any differences between the faces when printed. 

This dice is printable without supports as long as you have good bed adhesion. I totally recommend printing with a brim to help increase bed adhesion. I also recommend 100% infill. This is a 19mm dice and should fit in any normal dice tower.

Print instructions

• Layers as small as you would like for best detail
• 100% Infill (It doesn't use much filament because it is so small but it makes it evenly weighted)
• Use a brim for increased bed adhesion
• Leave the dice oriented as it is in the STL on its edge.

I would love to see some remixes of this with better designs and see what you all come up with!