I remixed the mount for the microprobe because the pin of the probe is very short which made it impossible for me to get the right distance to the printing bed.
So I made the height of the mount adjustable.
Use a washer with the original screw.
I manually moved the nozzle to just touch the bed and then adjusted the tightening screw for the probe mount so it sits a very short distance above the bed.
Then I deployed the probe in Klipper and checked that it touches before the nozzle.
Can be printed without support by rotating.
My offsets are:
X = 44
Y = 0
The author remixed this model.
I made it height adjustable