Raspberry Pi 5 + Pimoroni NVMe Base Case

A case for the 1U Raspberry Pi Rack with Modular Trays that adds space to mount a Pimoroni NVME Base
15
99
1
2413
updated March 8, 2024

Description

PDF

A remixed model to add an Pimoroni NVMe Base to the Raspberry pi 5

This model has the LED & OLED openings (and a version that also has a button opening), and an opening to connect the USB-C port.

The 4 holes for the NVMe base need to get a M2.5 insert

Can be printed upright without supports (I added a brim of 10mm to mine, but it feels very stable so you can possibly do without it). A print takes about 60 grams.

NOTE:  In the cover photo is an older version of this model (where I forgot that I covered up 1 of the holes). This is fixed in the uploaded model.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Original model is the Pi 3 / 5 mount

I cut away material around the mounting holes as these interfered with my raspberry pi active cooler (the pins to clamp it down couldn't be pressed in all the way).

Finally I added 4 new holes that can fit a M2.5 insert onto which you can screw down the Pimoroni NVMe Base

License