Laptop Hanger for 2040 Extrusion

I wanted a way to store my laptop and keyboard on the side of my desk when not in use. My desk frame is made from 2040 extrusion, so mounting with M5 hardware is easy. I don't print these with supports. Depending on material, settings, and how well your printer is tuned you may want to touch up the mounting holes with a 5.5mm or 7/32" drill in post processing. 

I printed mine on a Sovol SV06+. This is 283mm in its longest dimension to support my ASUS Vivobook with a height of roughly 235mm. The smaller hook is sized for my keyboard with a height of roughly 130mm.

Do what you want for material and settings, but I printed mine out of PETG in the orientation of the model supplied. 0.8 nozzle, 1.0 line width, 3 perimeters, 0.32 layer height, 4 top and bottom layers