PS2 PlayStation 2 Fan Adapter 60x60x15 Sunon

What it's for

A drop-in replacement for original PS2 fan. It adapts Sunon HA60151V4-1000U-A99 fan to fit inside old fan slot.

Does it need to be Sunon?

No. The little tabs holding the fan in place are tailored to Sunon, but there's a possibility that your fan may mesh with those tabs as well. Removing them should allow for any 60x60x15 fan to be installed. You could use some thin double sided tape or hot glue to keep the fan in place inside the bracket. You could also design tabs for your fan of choice. I've included a .step file.

Printing

I've printed it with Prusament PETG Jet Black, 0.2mm STRUCTURAL, MK4IS 0.4 nozzle and had zero problems. Check out the .3mf project file for details.